EVF-P

EVF-Pweb.JPG

Features

Luminaires for fluorescent lamps with a circular shape polycarbonate-made light housing and two end-cups in copper free Aluminium. The high resistance policarbonate light-housing is made of 3 different layers-extrusion to grant the best possible protection against direct sun heating and radiation effect while the circular shape is aimed to grant the best possible ”CX” factor and to avoid pollution and dirty bunching on surfaces.

Specifications

 

Material Two end-cups in copper free Aluminium mounted on a circular shape polycarbonate made
IP Rating IP66
Operating Temperature -20°C to 50°C
Certification Type Examination Certificate INERIS 02ATEX0039
& Approvals GOST Certificate РОСС IT.ГБ04.В00510
Standards EN 60079-0 / 60079-1 / 61241-0 / 61241-1
Ex-code Ex d IIC T6
Ex tD A21 IP66 T85°C
According to European Directive 94/9/EC (ATEX)
For Zone 1 / Zone 21 / Zone 2 / Zone 22
Surface treatment Aluminium end-cups and cover painted by green colour polyurethane painting cycle (RAL 6003)
Gaskets O-ring made in Nitrile Rubber (NBR)
Thread Num. 2 opposite M20 pitch 1.5 metric threated entries. One plugged-off by brass nickel plated EEx-d plug with relevant gasket
Hardware and Screw AISI 304 Stainless Steel external hardware and screws
Lamps EVF-P Series is suitable for two pins fluorescent lamps G13 socket PHILIPS TL-D
Lamps Wattage 18 / 36 / 58 W
Ballast High Frequency Electronic ballast
Rated operation voltage (UE) 220-240 V
Frequency 50 ÷ 60 Hz
Power factor > 0,95
Accessories
  • Pole mounting Kit stainless steel AISI 304 made, type P14
available upon request
  • Ceiling mounting Kit AISI 304 made, type G33° bottom entry M20
request
  • Emergency Service EVF-P lighting fixtures for Emergency Service are available, see:Ø  EVF-P...LE-P
Note The screw-cover of EVF-P, when opened, will stand linked to the
body of the lighting fixtures by mean of a stainless steel chain Steel made white coated internal reflector is also the support for electrical equipment. It is fully withdrawable in order to allow an easy re-lamping and maintenance.